10/11/12 Series Products: Xuchuan Chemical provides high-quality thermoplastic polyurethane elastomer raw materials for the economical injection molding industry, which have the characteristics of high cost-effectiveness, good transparency, good anti precipitation performance, and short processing cycle. They can be widely used in industries such as shoe materials and protective covers.
Characteristic：Good transparency, low friction coefficient, minimal precipitation, excellent physical and mechanical properties, short injection cycle
Application：Injection molding, shoe midsole, shoe accessories, industrial supplies
Characteristic | test method | Test Unit | 1050P | 1060P | 1065P | 1075 | 1180 | 1185 | 1190 | 1290 | 1292 | 1195W5 | 1195W6 |
Hardness | ASTM D2240 | Shore A | 53±2 | 62±2 | 65±2 | 76±2 | 82±2 | 85±2 | 92±2 | 90±2 | 90±2 | 96±2 | 96±2 |
Density | ASTM D792 | g/cm3 | 1.17 | 1.17 | 1.19 | 1.24 | 1.24 | 1.24 | 1.24 | 1.24 | 1.24 | 1.25 | 1.25 |
Tensile strengt | ASTM D412 | MPa | 15 | 17 | 25 | 30 | 30 | 35 | 35 | 32 | 30 | 35 | 35 |
Elongation at break | ASTM D412 | % | 1100 | 800 | 650 | 550 | 700 | 650 | 550 | 650 | 650 | 550 | 550 |
100% modulus | ASTM D412 | MPa | 1.2 | 1.8 | 2.2 | 4.3 | 4.0 | 5.0 | 10.0 | 7.5 | 7.0 | 12.0 | 12.0 |
Tear strength | ASTM D624 | kN/m | 50 | 60 | 70 | 95 | 95 | 105 | 135 | 135 | 130 | 150 | 155 |
Friction loss | ASTM D5963 | mm3 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 | ≤ 70 |
Suggested processing temperature | ℃ | 180±10 | 180±10 | 180±10 | 190±10 | 190±10 | 200±10 | 200±10 | 200±10 | 200±10 | 220±10 | 220±10 |
